Jandy R0466500 Original Tank Bottom Assembly for CL, DEV, DEL Series Filters

Jandy R0466500 Tank Bottom Assembly fits the following filter models:

• Jandy CL series filter models:  CL340, CL460, CL580
• Jandy DEV and DEL series filter models:  DEV48, DEV60, DEL48, and DEL60

Pro Tip:

There are 4 main causes for Jandy CL, DEV, or DEL filter tank bottom failures due to cracks or leaks that require filter tank replacement:

• Cause #1:  Pressure gets too high in the filter tank resulting in a stress crack in the tank
  • Solution:   Monitor filter pressure gauge.  Clean off filters thoroughly.  After cleaning, confirm pressure gauge shows less than 12 PSI, else replace filters
• Cause #2:  Filter tank location is exposed to all the elements:  sun, rain, cold, heat.
  • Solution:   Consider having some sort of "protective cover" installed to keep the filter unit out of direct exposure to the elements.
  •  Luckily, my pool equipment was installed next to the house and under my balcony.  25 years and never had an issue.
• Cause #3:   Fitting over-tightening can cause a crack on the tank at the fitting location. 
  •  Solution:  Pipe and drain fittings should only be hand tightened when installing/re-installing to filter tank.  Over-tightening using a wrench may cause a stress fracture on the fitting on the tank resulting in a leak.
• Cause #4:   Clamp Assembly mis-alignment and over-tightening can cause damage to the top edge of the tank.
  •   Solution:  When re-assembling the filter after maintenance be sure to properly align the tank lid, tank bottom, and clamp assembly before tightening down the clamp assembly.  Improper alignment coupled with tightening can damage the clamp, tank bottom, and/or tank lid.

Specifications

Jandy original tank bottom assembly for CL, DEV, and DEL series filters.  Part number R0466500.

Includes the following items:

1. Bottom Tank Retaining Ring (R0405200)
2. Tank O-ring (R0357800)
3. Drain Cap Assembly (R0523000)
4. Bulkhead Assemblies with O-rings (R0465600)
5. Inlet Elbow with O-ring (R0358400)
6. Universal Union Set (R0461800 and R0522900)

NOTE:  Pipe connections are on SAME SIDE of filter tank.  If your tank has one pipe fitting on each side of filter tank use the filter tank bottom for the Jandy CV series filter models: CV340, CV460, and CV580.  Part number R0465400.

Manufacturer
Jandy

Are you looking for Jandy CL340 filter parts?

Are you looking for Jandy CL460 filter parts?

Are you looking for Jandy CL580 filter parts?