Jandy R0554700 fits the following filter models:
- Jandy CL and CV series filter models: CL340, CV340, CL460, CV460
- Jandy DEV48 and DEL48 D.E. Filters
Pro Tip:
There are 3 main causes for filter tank lid failures because of cracks or leaks that require filter tank lid replacement:
- Cause #1: Pressure gets too high in the filter tank resulting in a stress crack in the tank lid
- Solution: Monitor filter pressure gauge. Pressure at 20 PSI or higher indicates the pressure is too high. Clean off filters thoroughly. After cleaning, confirm pressure gauge shows less than 12 PSI, else replace filters. Clean out pump leaf trap and skimmer basket.
- Cause #2: Filter tank location is exposed to all the elements: sun, rain, cold, heat.
- Solution: Consider having some sort of "protective cover" installed to keep the filter unit out of direct exposure to the elements.
- If inital installation of pool equipment, consider location to keep equipment out of direct exposure to the elements.
- Luckily, my pool equipment was installed next to the house and under my balcony. 25 years and never had an issue.
- Cause #3: Over-tightening or improper tightening can cause a crack on the tank lid at the fitting location.
- Solution #1: Pressure gauge and air relief assembly fittings should only be hand tightened when installing/re-installing to filter tank lid. Ensure threadings are aligned and be sure not to force tightening. Over-tightening or forcing by using a wrench may cause a stress fracture on the fitting on the tank lid resulting in a leak.
- Solution #2: When removing and re-installing the filter lid for filter maintenance, do NOT over-tighten and ensure proper alignment before tightening. Over-tightening or mis-aligning clamp assembly can result in stripping threading on the locking clamp, or worse, damaging the filter tank or filter lid. This damage can cause the inability to tightly lock down the lid and will cause a leak and require replacement of any of the parts involved in locking down the lid: clamp assembly, filter lid, or filter tank bottom.
Specifications
Jandy Tank Top Lid for CL340/CV340 and CL460/CV460 series filters. Part number R0554700.
- Genuine Jandy replacement part ensures proper fit and function of your pool filter
- Gray color to match your Jandy filter system
- Made of high quality corrosion resistant material
- Fits and locks in to the filter clamp assembly to properly seal the filter
- Easy grip handles make maintenance easy
Manufacturer
Jandy
Are you looking for Jandy CL340 filter parts?
Are you looking for Jandy CL460 filter parts?
Are you looking for Jandy CL580 filter parts?
